Roll-a-Ramp Portable Flexible Ramp System
Roll-a-Ramp is a revolutionary new flexible ramp system, designed to improve disabled access to public buildings, homes, shops and all other premises which have yet to make allowances for people with disabilities.
Download Roll-a-Ramp Portable Flexible Ramp System Product Specification Sheet
Constructed using high-tensile aluminium, Roll-a-Ramp is lightweight, flexible and highly portable, and can be easily set up by family members or carers - simply roll it out and it's ready to use!
- WINNER - Best New Product Award at two of the world's largest disability product exhibitions, MedTrade and NAIDEX UK (2003).
The Roll-a-Ramp system is fully DDA (Disability Discrimination Act) compliant, and has been safety tested using wheelchairs, powerchairs and mobility scooters. The system has the potential to improve quality of life for disabled people and their carers, by doing away with cumbersome wheelchair ramps and allowing access to previously inaccessible premises.
Sue Maynard-Campbell , Director of the UK's most prestigious disability training company, Equal Ability , ends her review of the Roll-a-Ramp system with the words, 'With its inherent flexibility backed up by a 10 year warranty , Roll-a-Ramp is now the best solution to a wide range of access barriers that require an adjustment under the Disability Discrimination Act.'
For further information on the highly portable, flexible wheelchair ramps created by Roll-a-Ramp, contact the team at Bentley Fielden UK on freephone 0800 612 1140, or buy online today.
Roll-a-ramp single ramp
width 30" (76.2cm)
| Code | Length | Total Ramp Weight / SWL | Price (ex VAT) | VAT Payable | VAT Exempt |
|---|---|---|---|---|---|
| RRS3 | 3ft (91cm) | 19.5lbs (8.8Kg) / 1000lbs (454Kg) | £297.00 | ||
| RRS4 | 4ft (1.22m) | 26lbs (11.8Kg) / 1000lbs (454Kg) | £396.00 | ||
| RRS5 | 5ft (1.52m) | 32.5lbs (14.7Kg) / 1000lbs (454Kg) | £495.00 | ||
| RRS6 | 6ft (1.83m) | 39lbs (17.7Kg) / 1000lbs (454Kg) | £594.00 | ||
| RRS6.5 | 6.5ft (1.98m) | 42.3lbs (19.2Kg) / 1000lbs (454Kg) | £644.00 | ||
| RRS7 | 7ft (2.13m) | 45.5lbs (20.6Kg) / 1000lbs (454Kg) | £693.00 | ||
| RRS7.5 | 7.5ft (2.29m) | 48.8lbs (22.1Kg) / 1000lbs (454Kg) | £743.00 | ||
| RRS8 | 8ft (2.44m) | 52lbs (23.6Kg) / 1000lbs (454Kg) | £792.00 | ||
| RRS9 | 9ft (2.74m) | 58.5lbs (26.5Kg) / 1000lbs (454Kg) | £891.00 | ||
| RRS10 | 10ft (3.05m) | 65lbs (29.5Kg) / 875lbs (397Kg) | £990.00 | ||
| RRS11 | 11ft (3.35m) | 71.5lbs (32.4Kg) / 800lbs (363Kg) | £1089.00 | ||
| RRS12 | 12ft (3.66m) | 78lbs (35.4Kg) / 725lbs (329Kg) | £1188.00 | ||
| RRS13 | 13ft (3.96m) | 84.5lbs (38.3Kg) / 650lbs (295Kg) | £1287.00 |
Specified Weight Limit (SWL) for pair of ramps n.b. Ramps of bespoke length can be fabricated using the positive locking pins (see Accessories), i.e. a pair of 8ft ramps can be easily connected to another pair of 8ft ramps to form a pair of 16ft ramps.
Roll-a-ramp track pairs
width 12" (30.5cm)
| Code | Length | Individual 12" Ramp Weight / SWL | Price (ex VAT) | VAT Payable | VAT Exempt |
|---|---|---|---|---|---|
| RRT3 | 3ft (91cm) | 9lbs (4.1Kg) / 2000lbs (907Kg) | £413.25 | ||
| RRT4 | 4ft (1.22m) | 12lbs (5.4Kg) / 2000lbs (907Kg) | £551.00 | ||
| RRT5 | 5ft (1.52m) | 15lbs (6.8Kg) / 2000lbs (907Kg) | £688.75 | ||
| RRT6 | 6ft (1.83m) | 18lbs (8.2Kg) / 2000lbs (907Kg) | £826.50 | ||
| RRT6.5 | 6.5ft (1.98m) | 19.5lbs (8.8Kg) / 2000lbs (907Kg) | £895.50 | ||
| RRT7 | 7ft (2.13m) | 21lbs (9.5Kg) / 2000lbs (907Kg) | £964.25 | ||
| RRT7.5 | 7.5ft (2.29m) | 22.5lbs (10.2Kg) / 2000lbs (907Kg) | £1033.00 | ||
| RRT8 | 8ft (2.44m) | 24lbs (10.9Kg) / 2000lbs (907Kg) | £1102.00 | ||
| RRT9 | 9ft (2.74m) | 27lbs (12.2Kg) / 2000lbs (907Kg) | £1239.75 | ||
| RRT10 | 10ft (3.05m) | 30lbs (13.6Kg) / 2000lbs (907Kg) | £1377.50 | ||
| RRT11 | 11ft (3.35m) | 33lbs (15Kg) / 2000lbs (907Kg) | £1515.25 | ||
| RRT12 | 12ft (3.66m) | 36lbs (16.3Kg) / 2000lbs (907Kg) | £1653.00 | ||
| RRT13 | 13ft (3.96m) | 39lbs (17.4Kg) / 2000lbs (907Kg) | £1790.75 |
Specified weight limit (SWL) for pair of ramps
n.b. Ramps of bespoke length can be fabricated using the positive locking pins (see Accessories), i.e. a pair of 8ft ramps can be easily connected to another pair of 8ft ramps to form a pair of 16ft ramps.
Accessories for Roll-a-Ramps
Quick mount van kit
This assembly provides a simple installation of the Roll-a-Ramp into the side door of most full size vans. Using the Roll-a-Ramp manual bi-fold feature makes this a simple inexpensive option to allow many wheelchair users the ability to ride into their vans.
The kit includes the mount plate, special first link and positive lock pins to attach to the full Roll-a-Ramp.
| Part/Code | Pack | Price (ex VAT) | VAT Payable | VAT Exempt |
|---|---|---|---|---|
| Quick Mount Van Kit RRA3100 | Each | £242.00 |
Seg mount bracket kit
The Seg Mount (S) Bracket is a quick mounting universal bracket that provides a way to temporarily mount to both homes and vehicles using the ramps approach plate. Thumb screws on the bracket hold the ramp in place and provide security.
| Part/Code | Pack | Price (ex VAT) | VAT Payable | VAT Exempt |
|---|---|---|---|---|
| Seg Mount Bracket Set RRA3150 | Pair | £35.50 |
Slide right angle brackets
This universal bracket provides a handy method to attach the upper load bearing section of a Roll-a-Ramp to any surface.
Excellent for attaching beneath the door of a house or to a van floor.
| Part/Code | Pack | Price (ex VAT) | VAT Payable | VAT Exempt |
|---|---|---|---|---|
| Slide Right Angle Brackets RRA3160 | Pair | £36.77 |
Low van entry plate
These special approach plates are designed for use with small vans.
The Low Van Entry Plate will maximize the entry space on a mini van and accommodate the fascia that covers the van’s sliding door mechanism.
| Part/Code | Pack | Price (ex VAT) | VAT Payable | VAT Exempt |
|---|---|---|---|---|
| 12" (30.5cm) Low Van Entry Plate RRA3212 | Each | £98.06 | ||
| 30" (76.2cm) Low Van Entry Plate RRA3235 | Each | £162.95 |
26" approach plate for 30" ramp
This upper approach plate is for those who need entry into either vans or home with an opening less than 30" wide but still require a full 30" ramp for their chair needs. The safety fence guides the wheelchair through the narrowed opening.
| Part/Code | Pack | Price (ex VAT) | VAT Payable | VAT Exempt |
|---|---|---|---|---|
| 26" (66cm) Entry for 30" (76.2cm) Ramp RRA3220 | Each | £137.88 |
Spacer plates
The Spacers are used with the 12" twin track style Roll-a-Ramp sets. These Spacers provide security by making the ramp width constant with each use as well as ensuring that the width does not change. All spacers easily snap into place on the ramp safety rails.
| Part/Code | Pack | Price (ex VAT) | VAT Payable | VAT Exempt |
|---|---|---|---|---|
| 2" (5cm) Spacer Plate RRA3320 | Each | £14.06 | ||
| 5" (12.7cm) Spacer Plate RRA3350 | Each | £15.93 | ||
| 8" (20.3cm) Spacer Plate RRA3380 | Each | £18.39 |
Pickup tailgate brackets
For those who wish to load into the bed of a pickup, this bracket provides an extra degree of security by holding the first load bearing section to the pickup tailgate. Bracket must be secured to the tailgate with either rivets or screws. The low profile does not interfere with other uses.
| Part/Code | Pack | Price (ex VAT) | VAT Payable | VAT Exempt |
|---|---|---|---|---|
| Pickup Tailgate Bracket RRA3415 | Pair | £39.22 |
Centre support stands
For those who need a ramp longer than 12 feet (3.66m), we recommend the use of this support unit. One pair at the mid point will allow a Roll-a-Ramp to be constructed up to 20 feet (6.1m) in length.
| Part/Code | Pack | Price (ex VAT) | VAT Payable | VAT Exempt |
|---|---|---|---|---|
| Centre Support Stands RRA3612 | Pair | £219.00 |
Compact centre support stands
For those who need a ramp longer than 10 feet (3.05m), we recommend the use of this support unit. One pair at the mid point will allow a Roll-a-Ramp to be constructed up to 20 feet (6.1m) in length.
| Part/Code | Pack | Price (ex VAT) | VAT Payable | VAT Exempt |
|---|---|---|---|---|
| Centre Support Stands (Compact) RRA3612-2 | Pair | £205.36 |
Handrail kit
The Roll-a-Ramp handrail set provides security and safety. Constructed of aluminum reinforced PVC these rails are strong, light weight and maintenance free just as the Roll-a-Ramp itself.
The specially designed attachment brackets make the total installation quick and secure, yet the entire system can be easily removed to once again make your Roll-a-Ramp portable.
| Part/Code | Pack | Price (ex VAT) | VAT Payable | VAT Exempt |
|---|---|---|---|---|
| 8ft (2.44m) Handrail Kit RRA4000-8 | Each | £520.67 | ||
| 10ft (3.05m) Handrail Kit RRA4000-10 | Each | £579.36 | ||
| 12ft (3.66m) Handrail Kit RRA4000-12 | Each | £638.00 |
Folding transport trolley
For those who need a ramp longer than 10 feet (3.05m), we recommend the use of this support unit. One pair at the mid point will allow a Roll-a-Ramp to be constructed up to 20 feet (6.1m) in length.
| Part/Code | Pack | Price (ex VAT) | VAT Payable |
|---|---|---|---|
| Folding Transport Trolley RRA5000 | Each | £79.00 |
Positive lock pin
These quick release pins allow the user to couple and uncouple ramp sections quickly and easily. This assists with easy storage and fast coupling to various Roll-a-Ramp fittings and brackets.
| Part/Code | Pack | Price (ex VAT) | VAT Payable | VAT Exempt |
|---|---|---|---|---|
| Positive Lock Pin RRA3250 | Each | £11.00 |
Standard platform
High quality platform with 16" leg and 3" fine adjustment, 4ft (122 cm) square. Allows ample room for wheelchair to turn, ideal for allowing two ramps at right angles to cut down gradient. Supplied complete with two sided handrail kit.
| Part/Code | Pack | Price (ex VAT) | VAT Payable | VAT Exempt |
|---|---|---|---|---|
| Standard Platform RRAPF148HR | Each | £1562.00 |
